Skip to content

Litepanels Astra 6X Traveler Bi-Color Trio 3-Light Kit with V-Mount Battery Plates

R121,729.00
SKU 935-3202

Litepanels 6X Overview

Ready for the road, the Astra 6X Traveler Bi-Color Trio 3-Light Kit with V-Mount Battery Platesfrom Litepanels is built around a light source with a high CRI, surface mount LEDs, and color temperature that's variable from tungsten to daylight balance. The kit includes 3 Astra 6X fixtures, each with a light stand and a V-Mount bracket for optional battery use. A hard, wheeled Pelican case is included for storage and transport.

  • Astra 6X Bi-Color LED Panel

    Litepanels continues to expand and enhance their formidable LED line with the introduction of the Astra 6X Bi-Color LED Panel that is 6x the brightness of the original Bi-Color 1x1. As in previous versions of the 1x1 form factor, the Astra has variable tungsten to daylight color temperature with negligible color shift, 0-100% dimming and a universal (100-240 VAC) adapter. You can also run on 13-24 VDC batteries with separate purchase of a V-Mount or Gold Mount battery plate.

    The technological advancement and enhancement is evident in the high CRI and significantly increased brightness due to the use of tightly-binned LEDs and fine-tuned TIR (Total Internal Reflection) optics, resulting in a longer throw over a wider field. Another addition is the Astra Bi-Color's Dual Cooling. Choose the fan/convection mode or run silent with the field-replaceable fan off. You can control the Astra's functions locally or remotely with separate purchase of a DMX module. The Astra 6X Bi-Color comes with both US and EU power cables and a removable 5/8" TVMP connecter for hanging or stand mounting. Two 1/4"-20 female taps offer alternate mounting points.

    High Output
  • High performance LEDs with custom paired optics
  • Higher intensity equals longer throw with wider effective beam spread
  • Superior Color Reproduction
  • High color rendition (CRI)
  • Efficient Thermal Management
  • Ultra-quiet active cooling mode
  • Smooth Dimming from 0-100%
  • No noticeable color shift throughout the entire range
  • Flicker-free at any frame rate or shutter angle
  • Flexible, Modular Concept
  • Optional communications module allows the brightness, color temperature, and cooling mode to be controlled via DMX512 protocol (additional module options under development)
  • Optional yoke mounted Gold Mount or V-Mount battery plates
  • External power supply
  • Field-replaceable fan module
  • Modern Fixture Design
  • Easily identifiable and ergonomic manual controls for dimming, color, and power status
  • Aluminum I-beam core construction to provide maximum durability and superior thermal management
  • Aluminum accessory mounting points and lens/filter rails
  • End cap exhaust vents angle downward to direct air flow away from the fixture and help prevent foreign material from entering
  • Durable, industry standard 3-pin XLR locking power connector
  • Custom Curved Yoke Design
  • Wide, unobstructed tilt range
  • Yoke mounted power supply and optional battery plates with dual integrated cable guides
  • Removable TVMP connector for flexible mounting options
  • Two alternate 1/4"-20 mounting points
  • Kit Light Stand (8.5')

    This 8.5' Kit Light Stand from Litepanels is an aluminum 4-section support with a maximum height of 8.5' and a minimum height of 2.4'.

  • V-Mount Battery Bracket for Astra 1x1 LED Panel

    This Litepanels V-Mount Battery Bracket allows users to run their Astra 1x1 Bi-Color LED Panel with V-mount batteries. This bracket also includes a P-Tap to 3-pin XLR cable.

  • Trio Travel Case with Cut Foam for 3 Astra Lights (Black)

    The Trio Travel Case with Cut Foam from Litepanels is a Pelican iM3075 Storm Trak Case in black, that holds 3 Astra Lights. An injection-molded case made of HPX high performance resin, it is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won't unscrew from the case. Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. Hinges with integrated feet will hold fast under impact, and create a flat surface for upright stability. Three double-layered, soft-grip, solid-core handles, plus a lightweight and retractable telescoping handle, as well as rugged in-line wheels make it easy to transport.

    This case has a multilayer cubed foam bottom and a convoluted foam pad in the lid.

    Injection-molded case made of HPX high performance resin is virtually unbreakable, dent-resistant and shatter-resistant
    Tough, rugged and lightweight
    Airtight and watertight
    Multilayer cubed foam bottom and a convoluted foam pad in the lid
    Permanently attached Vortex valve automatically adjusts air pressure without letting in water, and won't unscrew from the case
    Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress
    Two unbreakable molded-in hasps allow the addition of standard size padlocks, offering another measure of security
    Hinges with integrated feet hold fast under impact and create a flat surface for upright stability
    Molded-in stacking ribs provide no-slip stability for multiple case-stacking during storage or transport
    Carrying options
    • Three double-layered, soft-grip, solid-core carrying handles provides strong, durable comfort
    • Lightweight, retractable, telescoping handle locks in place
    • Rugged in-line wheels have shielded ball bearings, are composed of a nylon core encased in a polyurethane tread, and are mounted on a solid axle for improved stability and ease of transport
    Tests
    • Meets ATA 300 category 1 standards for transit cases
    • Meets FED-STD-101C requirements for drops and vibration (loose cargo)
    • Exceeds the specifications listed in MIL-STD-648C for vibration (sweep)
    • Meets MIL-STD-810F for immersion and simulated rainfall